We also host the AskNik site,just click on the Sierra

Please if you find this site helpful & wish to help with it's funding. Thank You.

Recent Posts

Pages: 1 [2] 3 4 ... 10
Parts For Sale / Clean up Several parts for sale!!!!!
« Last post by capri v8 driver on October 18, 2020, 14:31:23 PM »
Clean up Several parts for sale!!!

For a classic mustang:

2 speed wiper motor with a interval function.

Asking price for the set: 100 euro.

A bunch of parts for the Ford C4 transmission.

Parts are used but there are also new parts.
Asking price for all the C4 parts: 250 euro.

A9P ecu ’89 til '93 mustang with a AOD automatic but it can be used for a manual. Ecu Pin 30 needs to be connected to earth. 

Asking price : 275,- Euro.

8LG ecu for a ’88 mustang with a AOD. It can be used for a manual. Ecu Pin 30 needs to be connected to earth.

Asking price 150 euro.

Both ecu's came from a running car.

Edis 8 module for a ford 8 cylinder with the connector.

asking price 75 euro.

I don't need to explain how rare these ecu's are in Europe and even in the states they are getting rare.

2.9 12v ecu from a ’90 scorpio.
0GHB 2.9 v6 ECU with cats w/o maf for automatic

Asking price 75 euro.

Distributor 2.9 v6 12v

Asking price 75 euro.

Throttle cable BOA Cosworth 2.9 24v

For a engine swap with a 2.9 24v BOA Cosworth with a automatic you need the throttle cable for the kick down switch.
Asking price 30 euro a piece.

Ford capri mk3 head lights LHD

Asking price 50 euro for the 4.

Fuel line for a holley double pumper.

asking price 25 euro.

Vented Rear disk brake kit for a ’93 thunderbird 2.3 turbo. These kits a used for rear disk conversions with a 8.8 rear axle but if you make you own brackets they can be used for most rear axles. 

Disks are 108 mm x4 but you can use other disks.

asking price 200 euro.

I also have a bunch of original Tremec T56 6 speed Dodge Viper parts.

Shim kit for all T56.

Asking price 25 euro.

Reverse gear wheel mainshaft 35t asking price 150 euro

Reverse gear wheel 1 piece counter shaft asking price 50 euro.

3e gear t56 37t asking price 150 euro

5e gear t56 67t asking price 120 euro

6e gear t56 58t asking price 110 euro.

The 5e and 6e gear wheels are for a T56 with a 1 piece countershaft with a single syncro.

1/2 syncr assembly asking price 100 euro.

3/4 syncro assembly asking price 100 euro.

Shift rod gm t56, Shift forks for the reverse and 5/6. asking price 25 euro for the shift rod and 25 euro per fork.

Tremec #51 Front Offset Lever (F-Body & GTO & Cobra & Viper) -

asking price 25 euro

Tremec #93g Rear Offset Lever (F-Body & Cobra & Viper) -

asking price 25 euro

T56 input shaft ford cobra 10 spline for a T56 with a 2.97 1e gear. asking price100 euro.

Z link voor alle T56. asking price 10 euro per 2.

I also have some other small stuff for the T56. These parts are for a original Dodge viper 6 speed gearbox till 2007 unless noted. Some of these parts will fit other T56. I don't need to explain how rare these T56 are in Europe and even in the states these parts are getting hard to find and are very priced. The parts can bought separately or you can make me a offer for all of the T56 parts.

Parts can be shipped if needed. PayPal preferred unless you pick them up.

Timewasters dreamers and people without money, please look further.

Parts For Sale / Re: Minker Zytek ECU
« Last post by Isaac005 on October 18, 2020, 08:59:07 AM »
How much are you looking for?
Parts For Sale / Minker Zytek ECU
« Last post by daz. on September 21, 2020, 20:00:43 PM »

I'm thinking of selling my Minker spec Zytek ECU. I got it from Dave a number of years ago for a project that never got off the ground. It's been stored in the same box Dave shipped it in. I have the plug and pins required to make the loom connection.

Any one interested? I'm open to offers.

I can post pictures if there's interest.
Parts For Sale / 2.0 Blacktop wanted
« Last post by Gareth on September 01, 2020, 10:42:17 AM »
Head gasket blown and bore scored on our 1994 2.0 silvertop, (RWD in a Haynes Roadster) looking for a good order under 100,000 mile (prefer lower than) blacktop for an upgrade. Anyone got something available? Don't need intake or exhaust manifolds.
Parts Wanted / BOA fuel rail
« Last post by cossiemk2 on August 31, 2020, 13:58:47 PM »
I'm looking for BOA fuel rail, preferably with the original fuel lines but I'm fine eitherway.

With shipping to Holland ;)

cheeRS Jurgen
Cars For Sale / Re: XR4x4 Twin Turbo
« Last post by capri v8 driver on July 16, 2020, 15:24:42 PM »
Sad to see it go after all the work that's gone into it.

There will be people for it but the market for cars is down at this moment due the Corona virus and the coming crisis. Looking at ebay the ones that are getting sold for high prices are in original and excellent condition. The ones with work are sold for little money. 

My advice, don't sell it but hang on to the car till times are beter and look for a other storage place or stick it in a shipping container and ship it over to the OZ. Sierra's are very rare in the OZ as only the RS500 is sold in the OZ for racing. So you would have something very special over there.

Cars For Sale / XR4x4 Twin Turbo
« Last post by sierra3dr on July 12, 2020, 10:49:03 AM »
Taken from the XR-Owners forum ......."Hi all, used to be on these forums waaaaaayy back in the day, I traveled to Oz many years ago and ended up staying, sadly leaving my XR4x4 Twin Turbo behind. It now looks like I have to move it from where it was stored/sitting in UK. Its been sitting idle outside for a number of years now unfortunately, but basic spec/info:


- Fully rebuilt with Minker spec pistons + heads (from Allan Jeffery, I'd have receipts somewhere) basically had only just been run in before being parked up.
- Lotus Carlton Injectors
- MBE Engine Management
- Alloy Rocker Covers

Other Points

- 3 Spoke RS Wheel
- Front + Side RS skirts (also have used unfitted RS rear apron)
- Cossie 170mph clocks
- F Reg

Body wise I think its a bit messy aka lacquer peeling off paint and rust patches etc. Engine wise its stood for a few years, before that it was practically just run in (was due to go back in and finish off mapping).

I know its a bit hard go on without pics re condition etc, but are these cars/parts worth anything anymore ?"
« Last post by c.a.p.r.i on July 11, 2020, 22:25:14 PM »
Wanted, rear bumper RS skirt to finish off my MK3 hatchback project (the rear skirt from both the saloon & estate variant is slightly longer and won't fit the hatchback as i found out)
Already found the front skirt, boot spoiler & side skirts via ebay.
General Discussion / Re: Guess the wheel question.
« Last post by capri v8 driver on July 11, 2020, 11:04:54 AM »
This question is solved.

I was at the Mercedes dealer this morning and 1 of the older mechanics recognized the wheels. They are a custom set deriving from the Enkei EK96 and are extreme rare as these set of wheels were 16x8 and 16x9 with a very low backspacing and where never sold to the general public as they are a limit option for the Mercedes Sec and AMG models in the '80's. .

For the public the EK96 was only sold as 15x7 and 16x8 in very low numbers as these wheels are $$$$. A cheaper option for the same style wheel was the Remotec or BBS wheels.

If you found or have a wheel(s) that unknown maybe this treat could help. Just post a picture of your wheels.

General Discussion / Guess the wheel question.
« Last post by capri v8 driver on July 10, 2020, 20:40:24 PM »
Guess the wheel question.

I got these wheels on my Taunus 20m. They are 16 x 8 and 16 x 9 5x112. They are from Enkei made for Mercedes like the W124 and w126. They are 2 piece wheels with a center nut.

What the order/part number from this wheel? They are not the 92s or Zona wheels. Or does any one have more info about these wheels?

Pages: 1 [2] 3 4 ... 10
SMF spam blocked by CleanTalk