Please if you find this site helpful & wish to help with it's funding. Thank You.


Recent Posts

Pages: [1] 2 3 ... 10
1
understand.

Thanks for info.

 :thumbsup:
2
The MS is in most of the time a beter option than trying to modify the original EEC5 ECU. However not everyone has the experience to install or tune a MS and most don't not need all tuning options and there are other cost when you go this way.

If you go for the MS, stay away from the MS1 and 2 versions and go for the MS3. 
3
Hi guys, long time not here and such a development.

Just curious, why to stick with that old crap, why no go for MegaSquirt or some more expensive aftermarket ECU with some modern (USB) way for flashing and tuning.
And for my SMT6 - that was not success, mainly my lack of experience.

We are two guys here in CZ to slowly go for MS on BOA with BOB cams and all that usuall crap like Vectra injectors and no CATs.
4
Parts Wanted / 2.9 under bonnet loom
« Last post by CB500T on August 08, 2017, 11:13:27 AM »
Wanted for a project..any loom from a 2.9 engined car..not the engine or injector looms   :rolleyes:
5
Members Cars / Re: 24v turbo 4x4 MK3 escort
« Last post by v6gerry on August 06, 2017, 10:43:40 AM »
Could always go for a gt series turbo on there Gerry  ;D

Glad its all going OK, you don't realise how much you enjoy driving an old car til you haven't had it for months  :-X

Hi Paul yes i thought about the GT turbo , i had a chat with tommy and looks like a boug waner twin scrol is the way to go , lots of ££££ and a new manifold will be needed , but for now im just loving jumping in and driving it .
hows yours going now got the new plenem fitted ?
6
Parts Wanted / wanted boa spark plug covers and heat shields
« Last post by Ptgladstone on July 30, 2017, 11:58:26 AM »
Hi all,

As per the title, I am looking for a pair of spark plug covers and heat shields for a BOA cosworth
7
General Discussion / Re: My pictures have gone, Thanks to photo bucket. Sorry.
« Last post by Dave on July 28, 2017, 07:39:43 AM »

That appears to work depending on which brower you use.

Internet explorer will take you to the picture folder if you click on the warning.

Where as safari does nothing for me.
8
Parts Wanted / Re: BOA loom..anyone make one?
« Last post by capri v8 driver on July 27, 2017, 08:20:08 AM »
Its beter if we do this true a PM.

9
Parts Wanted / Re: BOA loom..anyone make one?
« Last post by CB500T on July 26, 2017, 22:14:29 PM »
could you perhaps sort out my loom..I'll just post over what you require?
10
Parts Wanted / Re: BOA loom..anyone make one?
« Last post by capri v8 driver on July 26, 2017, 19:46:39 PM »
I make them but I am in the Netherlands.

Don't throw the BOA loom away because you need it to make it into a custom loom.
Pages: [1] 2 3 ... 10