Please if you find this site helpful & wish to help with it's funding. Thank You.


Author Topic: 2.9 poly vee pulley spacers  (Read 160 times)

0 Members and 1 Guest are viewing this topic.

Offline tane

  • Member
  • *
  • Posts: 6
  • Karma: +0/-0
  • OS:
  • iOS 11.4 iOS 11.4
  • Browser:
  • Safari 0.8.2 Safari 0.8.2
2.9 poly vee pulley spacers
« on: August 07, 2018, 19:00:41 PM »
I know the changes are small, but would somebody happen to have the spacers for 2.9 12v poly vee pulleys, water pump and crank?

Also circled in red in the picture



Offline capri v8 driver

  • Administrator
  • Hero Member
  • *****
  • Posts: 6722
  • Karma: +1/-0
  • OS:
  • Windows 10 Windows 10
  • Browser:
  • Edge 17.17134 Edge 17.17134
    • http://
Re: 2.9 poly vee pulley spacers
« Reply #1 on: August 11, 2018, 07:22:45 AM »
If you cant find them. Someone with a lathe should be able to make some spacers.
greetz Paul.

Capri V8 Driver.

Offline tane

  • Member
  • *
  • Posts: 6
  • Karma: +0/-0
  • OS:
  • iOS 11.4 iOS 11.4
  • Browser:
  • Safari 0.8.2 Safari 0.8.2
Re: 2.9 poly vee pulley spacers
« Reply #2 on: August 11, 2018, 08:21:01 AM »
I managed to find the waterpump spacer and planning to take the lathe route with the crank spacer. I measures my crank pulleys and it seems that the best one is actually from a bob, so would still have to modify the original spacer if I found one.