We also host the AskNik site,just click on the Sierra

Please if you find this site helpful & wish to help with it's funding. Thank You.


Author Topic: Mt75 geabox to engine dowels ?  (Read 8406 times)

0 Members and 1 Guest are viewing this topic.

Offline whiteestate

  • Sr. Member
  • ****
  • Posts: 481
  • Karma: +0/-0
  • OS:
  • Mac OS X 10.7.5 Mac OS X 10.7.5
  • Browser:
  • Safari 5.1.7 Safari 5.1.7
Mt75 geabox to engine dowels ?
« on: July 21, 2013, 15:56:53 PM »
Does anyone know where i can get a set of these for my boa engine to mt75 gearbox ? Think there is 2 iirc ?


"Praising what is lost makes the remembrance dear"

Offline Lemon-Ade

  • Donation Sponsor
  • Hero Member
  • *****
  • Posts: 1249
  • Karma: +1/-0
  • At work
  • OS:
  • Mac OS X Mac OS X
  • Browser:
  • Safari 6.0 Safari 6.0
Re: Mt75 geabox to engine dowels ?
« Reply #1 on: July 21, 2013, 20:33:56 PM »
Burton do them mate

Run in ......

Offline whiteestate

  • Sr. Member
  • ****
  • Posts: 481
  • Karma: +0/-0
  • OS:
  • Mac OS X 10.7.5 Mac OS X 10.7.5
  • Browser:
  • Safari 5.1.7 Safari 5.1.7
Re: Mt75 geabox to engine dowels ?
« Reply #2 on: July 21, 2013, 20:42:41 PM »
They do the 12.7mm 1/2'' think the ones i need are 15.2mm ?
"Praising what is lost makes the remembrance dear"

Offline Lemon-Ade

  • Donation Sponsor
  • Hero Member
  • *****
  • Posts: 1249
  • Karma: +1/-0
  • At work
  • OS:
  • Mac OS X Mac OS X
  • Browser:
  • Safari 6.0 Safari 6.0
Re: Mt75 geabox to engine dowels ?
« Reply #3 on: July 21, 2013, 21:32:29 PM »
I think that's the ID, they are the ones listed for cos 4x4 etc mt75.

Run in ......

Offline whiteestate

  • Sr. Member
  • ****
  • Posts: 481
  • Karma: +0/-0
  • OS:
  • Mac OS X 10.7.5 Mac OS X 10.7.5
  • Browser:
  • Safari 5.1.7 Safari 5.1.7
Re: Mt75 geabox to engine dowels ?
« Reply #4 on: July 21, 2013, 21:53:44 PM »
Burton no longer list them by the looks of it so i bought some 15mm thick wall stainless steel pipe should do the trick.
"Praising what is lost makes the remembrance dear"

Offline Dave

  • Administrator
  • Hero Member
  • *****
  • Posts: 5489
  • Karma: +3/-0
  • Gender: Male
  • Minker Owner & v6 specialist.
  • OS:
  • Windows XP Windows XP
  • Browser:
  • MS Internet Explorer 8.0 MS Internet Explorer 8.0
Re: Mt75 geabox to engine dowels ?
« Reply #5 on: July 25, 2013, 23:04:23 PM »

Make sure they fit exactly mate otherwise you will get vibrations.

It's the dowels that line everything up, the bolts just keep it together.
Dave

Offline capri v8 driver

  • Administrator
  • Hero Member
  • *****
  • Posts: 6801
  • Karma: +1/-0
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • MS Internet Explorer 10.0 MS Internet Explorer 10.0
    • http://
Re: Mt75 geabox to engine dowels ?
« Reply #6 on: July 26, 2013, 19:23:25 PM »
Quote
It's the dowels that line everything up, keeps parts from moving and the bolts just keep it together.

Fixed  :angel:
greetz Paul.

Capri V8 Driver.

Offline whiteestate

  • Sr. Member
  • ****
  • Posts: 481
  • Karma: +0/-0
  • OS:
  • Mac OS X 10.7.5 Mac OS X 10.7.5
  • Browser:
  • Safari 5.1.7 Safari 5.1.7
Re: Mt75 geabox to engine dowels ?
« Reply #7 on: July 27, 2013, 01:20:22 AM »
i have 15.2 mm on the bell housing holes so with the 15mm stainless dowels i can have a maximum of 0.4mm to play with is this too much?
Don't know what the block measures but I'm sure its going to be around 15mm surely !?
"Praising what is lost makes the remembrance dear"

Offline Lemon-Ade

  • Donation Sponsor
  • Hero Member
  • *****
  • Posts: 1249
  • Karma: +1/-0
  • At work
  • OS:
  • Mac OS X Mac OS X
  • Browser:
  • Safari 6.0 Safari 6.0
Re: Mt75 geabox to engine dowels ?
« Reply #8 on: July 27, 2013, 05:59:29 AM »
I will have a look for you today mate, I may have a couple in my garage somewhere.

Run in ......

Offline Dave

  • Administrator
  • Hero Member
  • *****
  • Posts: 5489
  • Karma: +3/-0
  • Gender: Male
  • Minker Owner & v6 specialist.
  • OS:
  • Windows XP Windows XP
  • Browser:
  • Chrome 28.0.1500.72 Chrome 28.0.1500.72
Re: Mt75 geabox to engine dowels ?
« Reply #9 on: July 27, 2013, 23:27:26 PM »
Quote
It's the dowels that line everything up, keeps parts from moving and the bolts just keep it together.

Fixed  :angel:

lol

No mate the reason I said that is a gearbox I built failed at around 10K & the guy went mad blaming me & also his mate blamed me who owned the garage who put the box in for him.

He helped me take the box out & there was no dowels fitted.
I showed him all the damage caused by not having the dowels fitted which you could see as the box was a good 4 mm + off centre.
His new clutch, gear set & front bearings were all shot.

He fell out big time with his so called mate at the garage who fitted it & sold the car cause he was sick of it!

Was a bit of a hot head  :rolleyes:


My advice would be fit the proper thing whiteestate or machine the pipe the same.

Also the dowels for Cologne heads are the same diameter, maybe you can get them.

I take it Ford don't have any then ??????


Dave

Offline capri v8 driver

  • Administrator
  • Hero Member
  • *****
  • Posts: 6801
  • Karma: +1/-0
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • MS Internet Explorer 10.0 MS Internet Explorer 10.0
    • http://
Re: Mt75 geabox to engine dowels ?
« Reply #10 on: July 28, 2013, 07:46:47 AM »
These are common dowels size as ford uses them a lot. They are also used between the block and head on most 4l, v6 and v8's.
greetz Paul.

Capri V8 Driver.

Offline Lemon-Ade

  • Donation Sponsor
  • Hero Member
  • *****
  • Posts: 1249
  • Karma: +1/-0
  • At work
  • OS:
  • Mac OS X Mac OS X
  • Browser:
  • Safari 6.0 Safari 6.0
Re: Mt75 geabox to engine dowels ?
« Reply #11 on: July 28, 2013, 09:37:39 AM »
I have some in a block for the heads, they measured the same as the box ones but not sure on the length or I have some stainless tube 16.06 od and 11.6id.

I'm sure I got some off burton recently for the new engine but I would need to check my receipts for the part no. The head ones are http://www.burtonpower.com/catalogsearch/result/?q=Tv1442

Run in ......

Offline whiteestate

  • Sr. Member
  • ****
  • Posts: 481
  • Karma: +0/-0
  • OS:
  • Mac OS X 10.7.5 Mac OS X 10.7.5
  • Browser:
  • Safari 5.1.7 Safari 5.1.7
Re: Mt75 geabox to engine dowels ?
« Reply #12 on: July 28, 2013, 14:49:28 PM »
I'm going to pop down to fords tomorrow and have a look to see what they have got as my pal is the parts manager so he should let me have a look at a few types the stainless rod i have got is going to be too loose as the dowels are usually a tight fit.
"Praising what is lost makes the remembrance dear"

Offline mk22door

  • Sr. Member
  • ****
  • Posts: 254
  • Karma: +0/-0
  • OS:
  • Mac OS X 10.5 Mac OS X 10.5
  • Browser:
  • Firefox 3.6.28 Firefox 3.6.28
Re: Mt75 geabox to engine dowels ?
« Reply #13 on: July 29, 2013, 20:21:26 PM »
I'm going to need some of these so keep us posted  ;)

Offline mk22door

  • Sr. Member
  • ****
  • Posts: 254
  • Karma: +0/-0
  • OS:
  • Mac OS X 10.5 Mac OS X 10.5
  • Browser:
  • Firefox 3.6.28 Firefox 3.6.28
Re: Mt75 geabox to engine dowels ?
« Reply #14 on: August 29, 2013, 21:28:56 PM »
What did you end up doing here then?

You get sorted?

Offline whiteestate

  • Sr. Member
  • ****
  • Posts: 481
  • Karma: +0/-0
  • OS:
  • Mac OS X 10.7.5 Mac OS X 10.7.5
  • Browser:
  • Safari 6.0.5 Safari 6.0.5
Re: Mt75 geabox to engine dowels ?
« Reply #15 on: September 06, 2013, 20:28:09 PM »
Ford do actually do them i have picked 2 up yesterday and will fit them sunday ford tried to give me the 1/2'' ones saying they were correct until i showed them the correct item on the parts finder. They are 15.2mm diameter and are the same for all cologne v6 engines
"Praising what is lost makes the remembrance dear"

Offline mk22door

  • Sr. Member
  • ****
  • Posts: 254
  • Karma: +0/-0
  • OS:
  • Mac OS X 10.5 Mac OS X 10.5
  • Browser:
  • Firefox 3.6.28 Firefox 3.6.28
Re: Mt75 geabox to engine dowels ?
« Reply #16 on: September 07, 2013, 15:54:04 PM »
You got a finis number for them & I'll get some ordered  ;)

Offline whiteestate

  • Sr. Member
  • ****
  • Posts: 481
  • Karma: +0/-0
  • OS:
  • Mac OS X 10.7.5 Mac OS X 10.7.5
  • Browser:
  • Safari 5.1.7 Safari 5.1.7
Re: Mt75 geabox to engine dowels ?
« Reply #17 on: September 22, 2013, 20:33:32 PM »
Heres the part number you need 2

"Praising what is lost makes the remembrance dear"

Offline mk22door

  • Sr. Member
  • ****
  • Posts: 254
  • Karma: +0/-0
  • OS:
  • Mac OS X 10.5 Mac OS X 10.5
  • Browser:
  • Firefox 3.6.28 Firefox 3.6.28
Re: Mt75 geabox to engine dowels ?
« Reply #18 on: September 27, 2013, 12:45:01 PM »
Many thanks

 ;D

 

SMF spam blocked by CleanTalk