Raising Funds for a 24V Manual ECU Fund (testing water atm) NEW ADDITION CHOICE

[Dave]

I will let Dave2302 answer that cause he has done the homework.


What we hope to have is a bin file without auto control, PATS etc.

There is various ways of flashing an ECU with a new bin file including a friendly Ford garage.

However tweaking it & live mapping is another matter.

[Dave2302]

Hi,

Yes if you wish to do it yourself we can send you a copy bin and then you can buy the Clint Garrity Binary Editor with dongle and mongoose J2534 upgrades, and the cable and you can do it yourself  

Clint Garrity BE is the only program that will reflash the ECU Chip via OBD when used with the Mongoose + lead.

If you want to "Live Map" it you will need some Moates gear including an Emulator, (Moates is the cheapest option.
CG BE will datalog, I use Innovate wideband for the fuel air mixture 

Cheers Dave

[REGMCI]

Thanks Dave for the précisions!  

So it's what I need  

[j.ballijns]

Hello all,
I am new here but watching for years.
I am in for GBP 200 for the BOB EECV EXIT.

Jack Ballijns

[Dave]

1. Dave2302    - NO PREFERENCE                 - £200
 2. Dave         - NO PREFERENCE                 - £200
 3. Cortiworth - EXIT or whatever BOB ecu   - £200
 4. Matt         - NO PREFERENCE                 - £200
 5. T4T          - NO PREFERENCE                  - £100
 6. REGMCI     - NO PREFERENCE                  - £100
 7. j.Ballijns     - BOB EECV EXIT                   - £200
 8.
 9.
10.

Thanks Jack.

This is yet to be confirmed but I am pretty sure a Ford dealer with a WDS could upload the finished modified bin file.
Also there looks to be some after market OBD2 stuff that can do it.
Or send an ECU to Dave who can defo do it.

But to be able to map it you will need to buy extra hardware.

[KetsMcLets]

Is this still an option? I have a TACK ecu and would be interested to have the PATS and autobox removed from the ECU.

[king2]

Hi guys, long time not here and such a development.

Just curious, why to stick with that old crap, why no go for MegaSquirt or some more expensive aftermarket ECU with some modern (USB) way for flashing and tuning.
And for my SMT6 - that was not success, mainly my lack of experience.

We are two guys here in CZ to slowly go for MS on BOA with BOB cams and all that usuall crap like Vectra injectors and no CATs.

[capri v8 driver]

The MS is in most of the time a beter option than trying to modify the original EEC5 ECU. However not everyone has the experience to install or tune a MS and most don't not need all tuning options and there are other cost when you go this way.

If you go for the MS, stay away from the MS1 and 2 versions and go for the MS3. 

[king2]

understand.

Thanks for info.