We also host the AskNik site,just click on the Sierra

Please if you find this site helpful & wish to help with it's funding. Thank You.


Recent Posts

Pages: 1 [2] 3 4 ... 10
11
Cars For Sale / XR4x4 Twin Turbo
« Last post by sierra3dr on July 12, 2020, 10:49:03 AM »
Taken from the XR-Owners forum ......."Hi all, used to be on these forums waaaaaayy back in the day, I traveled to Oz many years ago and ended up staying, sadly leaving my XR4x4 Twin Turbo behind. It now looks like I have to move it from where it was stored/sitting in UK. Its been sitting idle outside for a number of years now unfortunately, but basic spec/info:

Engine

- Fully rebuilt with Minker spec pistons + heads (from Allan Jeffery, I'd have receipts somewhere) basically had only just been run in before being parked up.
- Lotus Carlton Injectors
- MBE Engine Management
- Alloy Rocker Covers

Other Points

- 3 Spoke RS Wheel
- Front + Side RS skirts (also have used unfitted RS rear apron)
- Cossie 170mph clocks
- F Reg

Body wise I think its a bit messy aka lacquer peeling off paint and rust patches etc. Engine wise its stood for a few years, before that it was practically just run in (was due to go back in and finish off mapping).

I know its a bit hard go on without pics re condition etc, but are these cars/parts worth anything anymore ?"
12
Parts Wanted / FORD GRANADA MK3 FRONT & REAR BUMPER RS SKIRTS
« Last post by c.a.p.r.i on July 11, 2020, 22:25:14 PM »
Wanted, both front and rear bumper RS skirts to finish off my MK3 hatchback project (the rear skirt from the saloon version is different and won't fit the hatchback as i found out)
13
General Discussion / Re: Guess the wheel question.
« Last post by capri v8 driver on July 11, 2020, 11:04:54 AM »
This question is solved.

I was at the Mercedes dealer this morning and 1 of the older mechanics recognized the wheels. They are a custom set deriving from the Enkei EK96 and are extreme rare as these set of wheels were 16x8 and 16x9 with a very low backspacing and where never sold to the general public as they are a limit option for the Mercedes Sec and AMG models in the '80's. .

For the public the EK96 was only sold as 15x7 and 16x8 in very low numbers as these wheels are $$$$. A cheaper option for the same style wheel was the Remotec or BBS wheels.

If you found or have a wheel(s) that unknown maybe this treat could help. Just post a picture of your wheels.

   
14
General Discussion / Guess the wheel question.
« Last post by capri v8 driver on July 10, 2020, 20:40:24 PM »
Guess the wheel question.

I got these wheels on my Taunus 20m. They are 16 x 8 and 16 x 9 5x112. They are from Enkei made for Mercedes like the W124 and w126. They are 2 piece wheels with a center nut.

What the order/part number from this wheel? They are not the 92s or Zona wheels. Or does any one have more info about these wheels?



15
Parts For Sale / Re: For sale emerald K6 wiring loom for 24v cosworth engine
« Last post by scud on July 10, 2020, 12:46:02 PM »
How much are we talking for a loom mate

Sent from my 601HT using Tapatalk

16
General Discussion / Re: Cossy BOA running lean
« Last post by scud on June 03, 2020, 13:46:16 PM »
You say it seems lean,  what makes you think that?  Also what Paul said

Sent from my 601HT using Tapatalk
17
General Discussion / Re: Cossy BOA running lean
« Last post by capri v8 driver on May 20, 2020, 19:05:20 PM »
How is the fuel pressure and the lambda values?

And no there isn't much you can do with the stock ecu to make it run richer. Losing the EGR creates a very lean condition in the mid range of the RPM and the ecu cannot compensate for it.  Some people used bigger injectors or upped the fuel pressure but that opens a other box of problems.

The only way to run the engine properly without the EGR is to use aftermarket ECU.
18
General Discussion / Cossy BOA running lean
« Last post by Richard Knight on May 20, 2020, 17:06:55 PM »
Hi All,
I have a BOA engine running in a kit car and she seems to be running lean - the egr is removed but all else is normal including ECU. is there a way to richen up the mixture at all?
19
Welcome / Hello from Spain
« Last post by charly_rs on May 09, 2020, 11:47:06 AM »
Hi at all,

I'm Charly from Spain and I have a carbed Capri 2.8 v6 Turbo look.

Grateful to belong to this community.


Best Regards & Stay safe.
20
General Discussion / Re: Sierra front arb double washer mod
« Last post by scud on April 10, 2020, 18:59:25 PM »
yes it surprised me that is made so much difference especially the turn in being apparently improved.
I think the toe was 2 mm toe in
Pages: 1 [2] 3 4 ... 10
SMF spam blocked by CleanTalk