Powder coating

snoopaloopa · June 20, 2009, 21:35:01

Anything I should be careful of as I was going to get my cam covers and inlet cover powdercoated?
cheers

TwinTurbo · June 20, 2009, 23:59:35

is this on the 12v TT engine.

Main thing is to make sure 100% that there's no particls left from the process of cleaning and derusting. As quite a few 24V owners have found, blast media can hag arround especialy in the PCV ventialtion chamber..

TT

Dave · June 21, 2009, 01:00:19

Snoops is going 24V

There is a warning post at the top of this section about this.

You must make sure the parts are completely clean after the work as Rob says.

Take no chances mate.

snoopaloopa · June 24, 2009, 07:59:20

Mmm, pretty much what i thought then
Will get some blanks made up and fitted before i send them off for coating then
cheers.

TwinTurbo · June 24, 2009, 22:48:12

order you spare engine at the same time

TT

snoopaloopa · June 25, 2009, 21:34:21

Ever the optomist hey

littlegems4x4 · June 26, 2009, 14:31:52

Don't do it Mr Loopa, have a chat with Gaf

snoopaloopa · June 26, 2009, 18:20:37

I have already matey

Decided to go down a different route now anyway

cheers.